Updated: Nov 25, 2025 What’s the difference between the ENV RD-10 [AU] and MITO METER 2.0 [EURO]?

Both meters come from the same factory and measure the same frequency ranges with identical functions and are custom calibrated in Australia. The RD-10 is a soft landing approach to screening EMF environments while the Mito 2.0 is a hard landing, reveling more shades of gray in terms of EMF gradients on all three modes. The ENV RD-10 [AU] is ideal for newcomers who want the simplest, most compact 3-in-1 meter on the market. The MITO 2.0 [EURO] builds on this by expanding the LED display readings, giving users deeper insight into what’s actually happening in their EMF environment.

MITO 2.0 [EURO] Reads in nanoTesla (nT) and microWatts per square meter (µW/m²) which is used in European countries.

ENV RD-10[AU] Reads in milliGauss (mG) and milliWatts per square metre (mW/m²) which is commonly used in the US.

The MITO 2.0 [EURO] also includes an 18-step LED display, compared to 9 steps on the ENV RD-10[AU]. MITO 2.0 [EURO] Power level scaling is based on Building Biology and BioInitiative guidelines, and has two alarm thresholds across all modes, while the ENV RD-10[AU] uses a single alarm.

Click on the link below to see the difference between the measurement methods of old Mito Meter which is the same as the ENV RD-10[AU] vs MITO 2.0 [EURO]. https://www.youtube.com/watch?v=OOMOEXEWqsQ

MITO METER 2.0 [EURO] user manual Here)

Measure Your Environment:

• You can't manage your non native EMF environment without an EMF/RF meter, as you wont have a starting point or know your end point. This is why we sell 3-in-1 screening meters to test your home and workplace for electromagnetic fields (EMF) and Radio Frequencies (RF/5G).

• Alternatively, you can hire a professional to assess your environment and recommend mitigation strategies. However, even then you need a screening meter like the ENV RD-10 [AU] or Mito Meter 2.0 to monitor your devices, surroundings and different locations you visit.

Protect Children:

• Avoid giving wireless devices (e.g., smartphones, tablets) to children under 13. If necessary, ensure the device is in airplane mode with Bluetooth and Wi-Fi disabled.

• Microwave radiation penetrates deeper into a child’s developing brain and nervous system, making it more harmful.

• Pre-download content to devices and use your Wi-Fi's timer to turn it off at night and/or set it to low RF power output mode.
  

Replace Wireless with Wired Solutions:

• Switch to wired devices where possible and ensure proper grounding of all wiring. The RD10 / Mito Meter's will read high readings above 10 to 15V/m on LFE MODE when a computer, phone or device is not grounded. (Or grounded incorrectly)
  

• Replace cordless “DECT” phones, disable Wi-Fi routers, and use Ethernet cables for computers, smart TVs, baby monitors, and gaming consoles. Use grounded Cat7 cables for devices with only two-prong power plugs.
  

• Opt out of smart meter installations.
  

Use Smartphones Safely:

• Keep your phone on airplane mode whenever possible. Be aware that newer smartphones emit high magnetic fields even in flight mode.

• Avoid carrying phones in your pocket or bra, and never place them to your head. Use speakerphone or an EMF-friendly wired headset.

• Do not use phones in cars, as radiation levels increase in enclosed spaces and even more when on the move. Limit use to texting or emergencies, and save high-data activities for a wired internet connection.

Consider Safer Cooking Options:

• Replace your microwave oven with a steam convection oven for safer and efficient cooking.

• Avoid induction cooktops, which generate high magnetic fields, and consider switching to gas.

Avoid Smart Appliances:

• Refrain from purchasing smart appliances, as most come with embedded RF chips.

Create a Sleep Sanctuary:

• Unplug all devices in your bedroom at night.

• Remove electronics like phones and tablets, and use a battery-powered alarm clock.

• Turn off the electrical circuit breaker for your bedroom at night, including the light circuit.

• Keep a flashlight by your bedside.

Up-Dated 21-07-25 Best in 3-in-1 meters class when it comes to overall sensitivity and accuracy. For most users, the Mito Meter & ENV RD-10[AU] provides all the sensitivity and accuracy needed to detect and avoid harmful wireless radiation and electromagnetic hot spots. Note: Very sensitive individuals, like those house bound, require very sensitive meters — such as the Safe & Sound Pro II and the EM3 combination. ($1500AUD+)

RF Readings In the Wi-Fi and Bluetooth (2.4 GHz) range, our custom-calibrated Mito Meters 2.0 & ENV RD-10[AU] deliver readings similar to the Safe & Sound Pro II — @1 µW/m². (See video Here) Electric Field Readings

Typical 3-in-1 meters deliver only poor to average e-Field performance. The new Mito Meter 2.0 & ENV RD-10[AU] sets a new benchmark, offering unmatched sensitivity—outperforming leading models such as the TF2, Cornet, EMF-390, and CEMPROTEC.

Magnetic Field Readings Mito Meter 1.0 to 2.0 & ENV RD-10[AU] versions are specially calibrated for detecting magnetic fields from power lines and electrical infrastructure. (@50/60Hz). Thanks to this custom calibration, they offer significantly higher sensitivity and accuracy at 50/60Hz compared to all other popular models, including the TF2, Cornet, EMF-390, and CEMPROTEC.

5G mmWave connectivity is a microwave dependent technology and not a standalone mobile solution like microwaves are. Our meters when in RF MODE detects the 5G mmWave lower multi-tier LTE/5G microwave bands. Note: Many parts of major Australian cities in 2025 still don't have 5G signal and rural areas have no 5G.

Our detectors use single-axis sensors because they are significantly more sensitive than three-axis sensors. This enhanced sensitivity allows the meters to measure magnetic fields as low as 1nT (0.01mG), far outperforming ALL other three-axis 3-in-1 meters on the market.

The custom calibrated versions are on par with high-quality professional devices like Gigahertz Solutions meters. This makes our meters the best 3-in-1 tool for testing background dynamic magnetic fields from the powergrid before buying a property.

No broadband meter can detect all Dirty Electricity (DE) frequencies. To measure DE—also referred to as high-frequency harmonics & transients on 50/60Hz electrical wiring—you will need a specialized meter. We recommend and use both the STETZERiZER® Microsurge Meter by Graham-Stetzer and the Alpha Lab In-Line EMI Meter. Both meters used together cover different frequencies. For analyzing the frequencies and mitigating area of concern, we recommend and use Aaronia Spectrum analyzers. In most cases, the Alpha Labs & STETZERiZER® Microsurge will be sufficient. Alternatively, you can use a standard AM/FM radio set to AM mode and tuned to the lower end of the spectrum. If DE is present, you will hear noise or interference on the radio. Step inside and outside your home or office with the radio; with clean 50/60Hz power, there should be little to no noise on the radio.

Note the above method doesn't capture high frequency DE in the higher kHz range like the Alpha Lab In-Line EMI Meter. However, the Alpha Lab In-Line EMI Meter can in some locations detect local radio stations which masks any DE present and why we also recommend the STETZERiZER, that only covers 105 to 150kHz. (The main area of concern.) Power filters can be purchased on-line, however we recommend custom solutions be installed by a professional. Please contact us if you would like an assessment or quote.

Common sources of Dirty Electricity include:

• Personal desktop Computers

• Fluorescent lights

• Compact fluorescent bulbs

• Dimmable light switches

• Smart meters

• Solar inverters

• Split-system air conditioning units with variable drive technology

• Electric Cars plugged into mains

• Poor or degrading cabling and connections

• Some switch mode transformers.
  

The most common sources are cell phone towers, smart phones, smart meters/monitors, wireless devices, Wi-Fi routers, printers, computers, electrical lighting, televisions, aircon, powerlines, power distribution boards, induction cooktops, cabling and vehicles.

For more info on where to check for nnEMF’’s see our EMF Basics pages [Here.]

Most 3-in-1 EMF meters today display all three modes—RF (Radio Frequency), Gauss (Magnetic Field), and Electric Field—simultaneously. However, this comes at the expense of sensitivity, which is why our meters only allows one mode to be selected at a time:

• RF: Radio Frequency Power (e.g., Wi-Fi, Bluetooth, IoT, 4G, 5G)

• LFM: Low-Frequency Magnetic Fields

• LFE: Low-Frequency Electric Fields
  

Running all three modes simultaneously creates additional load and/or noise on the circuit board, significantly reducing the RF sensitivity. This means some 3-in-1 meters can’t reliably detect RF levels below 100 µW/m², making environmental RF screening impossible. (ENV RD-100 Aside on its RF Mode.)

Professional-grade Building Biology meters address this issue by specializing in either high-frequency (RF) or low-frequency (magnetic and electric) measurements. Ideally, an RF meter should measure down to around 1 µW/m² (0.001 mW/m²) for effective screening.